← 返回学习路线

SYSTEM

缓冲区

Java基础缓冲区system
src/content/notes/system/缓冲区.md

缓冲区

基本介绍

缓冲区(Buffer):缓冲区本质上是一个可以读写数据的内存块,用于特定基本数据类型的容器,用于与 NIO 通道进行交互,数据是从通道读入缓冲区,从缓冲区写入通道中的

Buffer 底层是一个数组,可以保存多个相同类型的数据,根据数据类型不同 ,有以下 Buffer 常用子类:ByteBuffer、CharBuffer、ShortBuffer、IntBuffer、LongBuffer、FloatBuffer、DoubleBuffer


基本属性

  • 容量(capacity):作为一个内存块,Buffer 具有固定大小,缓冲区容量不能为负,并且创建后不能更改

  • 限制 (limit):表示缓冲区中可以操作数据的大小(limit 后数据不能进行读写),缓冲区的限制不能为负,并且不能大于其容量。写入模式,limit 等于 buffer 的容量;读取模式下,limit 等于写入的数据量

  • 位置(position):下一个要读取或写入的数据的索引,缓冲区的位置不能为负,并且不能大于其限制

  • 标记(mark)与重置(reset):标记是一个索引,通过 Buffer 中的 mark() 方法指定 Buffer 中一个特定的位置,可以通过调用 reset() 方法恢复到这个 position

  • 位置、限制、容量遵守以下不变式: 0 <= position <= limit <= capacity


常用API

static XxxBuffer allocate(int capacity):创建一个容量为 capacity 的 XxxBuffer 对象

Buffer 基本操作:

方法 说明
public Buffer clear() 清空缓冲区,不清空内容,将位置设置为零,限制设置为容量
public Buffer flip() 翻转缓冲区,将缓冲区的界限设置为当前位置,position 置 0
public int capacity() 返回 Buffer的 capacity 大小
public final int limit() 返回 Buffer 的界限 limit 的位置
public Buffer limit(int n) 设置缓冲区界限为 n
public Buffer mark() 在此位置对缓冲区设置标记
public final int position() 返回缓冲区的当前位置 position
public Buffer position(int n) 设置缓冲区的当前位置为n
public Buffer reset() 将位置 position 重置为先前 mark 标记的位置
public Buffer rewind() 将位置设为为 0,取消设置的 mark
public final int remaining() 返回当前位置 position 和 limit 之间的元素个数
public final boolean hasRemaining() 判断缓冲区中是否还有元素
public static ByteBuffer wrap(byte[] array) 将一个字节数组包装到缓冲区中
abstract ByteBuffer asReadOnlyBuffer() 创建一个新的只读字节缓冲区
public abstract ByteBuffer compact() 缓冲区当前位置与其限制(如果有)之间的字节被复制到缓冲区的开头

Buffer 数据操作:

方法 说明
public abstract byte get() 读取该缓冲区当前位置的单个字节,然后位置 + 1
public ByteBuffer get(byte[] dst) 读取多个字节到字节数组 dst 中
public abstract byte get(int index) 读取指定索引位置的字节,不移动 position
public abstract ByteBuffer put(byte b) 将给定单个字节写入缓冲区的当前位置,position+1
public final ByteBuffer put(byte[] src) 将 src 字节数组写入缓冲区的当前位置
public abstract ByteBuffer put(int index, byte b) 将指定字节写入缓冲区的索引位置,不移动 position

提示:“\n”,占用两个字节


读写数据

使用 Buffer 读写数据一般遵循以下四个步骤:

  • 写入数据到 Buffer
  • 调用 flip()方法,转换为读取模式
  • 从 Buffer 中读取数据
  • 调用 buffer.clear() 方法清除缓冲区(不是清空了数据,只是重置指针)
public class TestBuffer {
	@Test
    public void test(){
		String str = "seazean";
		//1. 分配一个指定大小的缓冲区
		ByteBuffer buffer = ByteBuffer.allocate(1024);
		System.out.println("-----------------allocate()----------------");
		System.out.println(bufferf.position());//0
		System.out.println(buffer.limit());//1024
		System.out.println(buffer.capacity());//1024
        
        //2. 利用 put() 存入数据到缓冲区中
      	buffer.put(str.getBytes());
     	System.out.println("-----------------put()----------------");
		System.out.println(bufferf.position());//7
		System.out.println(buffer.limit());//1024
		System.out.println(buffer.capacity());//1024
        
        //3. 切换读取数据模式
        buffer.flip();
        System.out.println("-----------------flip()----------------");
        System.out.println(buffer.position());//0
        System.out.println(buffer.limit());//7
        System.out.println(buffer.capacity());//1024
        
        //4. 利用 get() 读取缓冲区中的数据
        byte[] dst = new byte[buffer.limit()];
        buffer.get(dst);
        System.out.println(dst.length);
        System.out.println(new String(dst, 0, dst.length));
        System.out.println(buffer.position());//7
        System.out.println(buffer.limit());//7
       
        //5. clear() : 清空缓冲区. 但是缓冲区中的数据依然存在,但是处于“被遗忘”状态
        System.out.println(buffer.hasRemaining());//true
        buffer.clear();
        System.out.println(buffer.hasRemaining());//true
      	System.out.println("-----------------clear()----------------");
      	System.out.println(buffer.position());//0
      	System.out.println(buffer.limit());//1024
      	System.out.println(buffer.capacity());//1024
    }
}

粘包拆包

网络上有多条数据发送给服务端,数据之间使用 \n 进行分隔,但这些数据在接收时,被进行了重新组合

// Hello,world\n
// I'm zhangsan\n
// How are you?\n
------ > 黏包,半包
// Hello,world\nI'm zhangsan\nHo
// w are you?\n
public static void main(String[] args) {
    ByteBuffer source = ByteBuffer.allocate(32);
    //                     11            24
    source.put("Hello,world\nI'm zhangsan\nHo".getBytes());
    split(source);

    source.put("w are you?\nhaha!\n".getBytes());
    split(source);
}

private static void split(ByteBuffer source) {
    source.flip();
    int oldLimit = source.limit();
    for (int i = 0; i < oldLimit; i++) {
        if (source.get(i) == '\n') {
            // 根据数据的长度设置缓冲区
            ByteBuffer target = ByteBuffer.allocate(i + 1 - source.position());
            // 0 ~ limit
            source.limit(i + 1);
            target.put(source); // 从source 读,向 target 写
            // debugAll(target); 访问 buffer 的方法
            source.limit(oldLimit);
        }
    }
    // 访问过的数据复制到开头
    source.compact();
}